Search this site
Search the Web
Everything HP200LX: Knowledge, Products, Service

 Archives
9 years, 100's of pages of HP Palmtop Paper, jammed with tips, reviews and how-to's

Links
Most useful, up-to-date Web sites devoted to the HP 200LX

Downloads
Direct link into 1000's of pieces of Palmtop software

Tips from Our Techs

2008 Catalog
(PDF, 2.6 MB)

Contact Us/About Us

 
Weekly Palmtop Paper Newsletter
(Palmtop tips, latest happenings, and HP Palmtop Paper Store information)


 

 

Privacy Policy

I keep getting "Cannot Establish a Remote Connection" when using FILER

I keep getting "Cannot Establish a Remote Connection" when using FILER, from either the HP95LX or the PC, to transfer files to the HP 95LX.

Both systems must be running the FILER application for the connection to be established. There are a number of possible causes:
  1. 1. COM port on PC not correctly configured. The most common cause of trouble is that the FILER on the PC is trying to communicate through COM1 and the serial cable is plugged into COM2. To test this, use the PC's FILER Remote-Set command to tell FILER on the PC to use the COM2 serial port (described below). To change COM ports from within FILER on the PC, press <ALT>-F10 (the PC equivalent of pressing the 95LX MENU key). Then press remote-set config interface 2 (to select Com2) quit quit. The HP 95LX should be set to COM1, the 4 pin serial port.
  2. 2. Another PC program is running and using serial port. Another cause of difficulty in getting a remote connection is that another program running in the background on your PC has control of the COM port that the FILER is trying to use. To fix this, move the serial cable to another port and update the Remote Settings configuration. (To update the remote settings, use the same procedure as in the previous paragraph). After the port has been changed, try again to get the FILER to establish a remote connection.

  3.  

     

If you don't have another port, look at your system to find the source of the conflict. You can most easily do this by booting the system from a floppy disk with the smallest possible CONFIG.SYS and AUTOEXEC.BAT files. Then reboot the system. Start APP95. Try to establish a remote connection. If it works, then something in your more complete system setup is in conflict. To find it, systematically add to the CONFIG.SYS and AUTOEXEC.BAT files on the floppy disk each item which may be causing the conflict. Each time you add an item to the AUTOEXEC.BAT or the CONFIG.SYS, reboot the PC, start APP95, and try to establish a remote connection. When the connection fails again, you have found your culprit.


Notice about Palmtop.net
The Palmtop Network with its S.U.P.E.R. (Simply Unbeatable Palmtop Essentials Repository) software is now available under the domain name of hp200lx.net.  

 
 

Copyright © 2005 Thaddeus Computing Inc

<