Set up 95LX Connectivity Pack to work with the 100LX

You will need to have a high enough LASTDRIVE=n statement in your CONFIG.SYS to accommodate the additional drive letters. I have mine set five letters above my last physical drive.

Run Filer on the 100LX and the 95LX Connectivity Pack Filer on your desktop PC. Make sure the baud rate settings match, Communications, Remote Set. Don't go higher than 9600 baud. Make sure that the 100LX port is ON. Use ASERCL.ZIP [ON DISK] on the 100LX to assure it's on. On the desktop press F7 (split screen) and then F6 (remote) to connect. DC95.EXE and DCS95.EXE are files that come with the 95LX Connectivity Pack. Copy DCS95 .EXE from the desktop to your 100LX (or DC95 if you want to use the desktop as the server). Run DCS95 on the 100LX and after it loads, run DC95 on your desktop PC with the necessary switches (i.e.: DC95 -p:C2 to use COM2 as the port). Type DC95 /? to see a list of all the possible command settings.

Jorge M. Trevino CompuServe ID:[70142,1041]